Product Usage:
Crocodile shears are suitable for metal recycling companies, scrap mills, smelting and foundry companies to perform cold shearing on various shapes of steel and various metal structures in order to add qualified charge.
Features:
(1) Hydraulically driven, easy to operate and easy to maintain.
(2) Working blade length: 400mm, 600mm, 700mm, 800mm, 1000mm, 1200mm, Shear force from 8 tons to 400 tons, 8 grades in total. Cutting machine with an edge of 700mm or more is particularly suitable for cutting scrapped cars.
(3) Installation without foot screws, no power supply available Diesel powered crocodile shears safety operating procedures 1. The equipment should be operated by people. Others must not use it without training.
2. Before driving, check whether the parts are normal and whether the fasteners are firm.
3. It is prohibited to cut unannealed steel parts, cast iron parts, soft metal parts, excessively thin workpieces, workpieces with a length of less than 100 mm, and workpieces that exceed the length of the scissors.
4. During operation, the human body is not allowed to approach the drive section and the knife edge of the equipment, and the safety of surrounding personnel should be taken care of to prevent the material from curling up and hurting people. Cut the material as close as possible to the inside of the knife. When cutting short materials, do not feed with hand-held workpieces and feed with clamps.
5. When the equipment is in operation, the operator is not allowed to leave the post without permission. When the work is completed or temporarily left, the power supply should be cut off.
Crocodile shears are suitable for metal recycling companies, scrap mills, smelting and foundry companies to perform cold shearing on various shapes of steel and various metal structures in order to add qualified charge.
Features:
(1) Hydraulically driven, easy to operate and easy to maintain.
(2) Working blade length: 400mm, 600mm, 700mm, 800mm, 1000mm, 1200mm, Shear force from 8 tons to 400 tons, 8 grades in total. Cutting machine with an edge of 700mm or more is particularly suitable for cutting scrapped cars.
(3) Installation without foot screws, no power supply available Diesel powered crocodile shears safety operating procedures 1. The equipment should be operated by people. Others must not use it without training.
2. Before driving, check whether the parts are normal and whether the fasteners are firm.
3. It is prohibited to cut unannealed steel parts, cast iron parts, soft metal parts, excessively thin workpieces, workpieces with a length of less than 100 mm, and workpieces that exceed the length of the scissors.
4. During operation, the human body is not allowed to approach the drive section and the knife edge of the equipment, and the safety of surrounding personnel should be taken care of to prevent the material from curling up and hurting people. Cut the material as close as possible to the inside of the knife. When cutting short materials, do not feed with hand-held workpieces and feed with clamps.
5. When the equipment is in operation, the operator is not allowed to leave the post without permission. When the work is completed or temporarily left, the power supply should be cut off.
Performance advantages:
1.Strong water absorption capacity
2.Increase the collection and release of samples
3.Good abrasion resistance
4.Do not scratch the wiped device
5.No chip drop
6.100% sterilization and disinfection
Operating Steps:
1 Touch the swab to the surface where it is aimed to obtain the sample.
2 Remove the tube cap and put the swab into the transport medium.
3 Break the shaft of the swab so that it will fit in the tube.
4 Close the cap securely.Write on the tube the necessary information about the patient and sample.
VTM Tube,Tube VTM,VTM Tube Price,VTM Test,VTM Test Tube,Lab Test Tube,Small Test Tube,VTM Sampling Tube
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yypcrtube.com