How to make the small balcony cleverly decorated and used

Q: The balcony of my house is usually very messy. How can I arrange the balcony to achieve beautiful and practical? Readers Ms. Chen A: Nowadays, almost every house has one or two balconies. Different houses have different widths and widths. However, it is indispensable to beautify the balcony and make full use of the balcony functions. The balcony is the extension of the interior of the building, and it is the transition between the interior space and the exterior space. It is the place where the occupants breathe fresh air, dry clothes, and place potted plants. In addition, some simple and light fitness equipment can be placed on the balcony, and it can also be used as a fitness and entertainment venue. If the balcony is close to the kitchen, you can use the corner of the balcony to build a locker to store some vegetables or infrequently used items. There is a balcony for rest, dining, and a small amount of folding furniture. Putting some flower bonsai on the balcony with the main function of leisure function is good for human health. You can also plant climbing vines and climb the balcony in the summer. It is full of vitality and delight. In addition to green plants, flowers, etc. can play a role in the decorative balcony, the balcony side wall surface, the ground is also the focus of decorative landscaping. For example, neatly decorated ceramic wall hangings, hanging plates, and other decorations can be placed on the side walls, and some partition walls can also be made in the form of shelves for placing decorative objects. On the smooth and elegant wall surface, weaving materials made of firewood, grass, rayon, brown and hemp can also be attached. The floor of the balcony can be paved with old carpets or other materials to increase the comfort of walking. In order to prevent the sunlight in midsummer, it is possible to make awnings from more solid textiles. The awnings not only have a decorative effect, but also can block wind and rain. Awnings can also be made with bamboo curtains and curtains. They should be made to be rolled up and down or retractable so that the area, location and angle of sunlight can be adjusted as needed. At the same time, the room on the side of the balcony can also be protected from intense sun exposure, creating a comfortable environment for indoor work and rest. It should be noted that the bearing capacity of the balcony floor is 200-250 kilograms per square meter. If the stacked items exceed the designed load carrying capacity, the safety will be reduced.

Balcony space renderings decorative space residential layout window partition wall cabinets kitchen cabinet doors

Rolling Machine

Plate rolling is a process of continuous three-point bending of sheet metal using a plate rolling machine. The equipment puts the sheet material between the upper and lower work rolls when rolling. The upper roller is raised and lowered vertically, and the two lower rollers rotate and move horizontally relative to the axis of the upper roller. When the upper roll descends, the plate is plastically deformed and bent between the upper and lower work rolls. The continuous rotation of the bottom roller drives the steel plate to advance and retreat through the friction between the plate and the roller to complete the coiling.
1. Pre-bending. When the plate is rolled, there is a length at both ends of the plate that does not bend because it does not touch the upper roller. It is called the remaining straight edge. In the process, the minimum force arm at which the plate starts to bend is called the theoretical remaining straight edge. The bending form (symmetrical bending, asymmetrical bending) is related.
2. Centering. The purpose of centering is to make the generatrix of the workpiece parallel to the roller axis to prevent skew.
3. Roll round. Rolling is the main process of product forming, which is divided into two types: one-time feed and multiple feeds. Multiple feeds are commonly used for rolling thick plates. The number of feeds depends on the technological constraints (such as the maximum allowable deformation during cold rolling) and equipment constraints (such as non-slip conditions and power conditions). When the rebound of the cold coil is significant, a certain amount of overcoiling must be added.
4. Straightening round. The purpose of rounding is to make the curvature of the entire circle as uniform as possible to ensure product quality. The general rounding process is divided into three steps:
(1) Load: According to experience or calculation, adjust the work roll to the position of the required maximum correction curvature.
(2) Rounding: Roll the roller 1 to 2 turns under the corrected curvature to make the entire curling rate uniform.
(3) Unloading: gradually unload the load, so that the workpiece is rolled several times under the gradually reduced correction load.

Rolling Machine,Three-Roller Bending Machine,Four-Roller Bending Machine,Roll Forming Machine

Rugao Yaou Import & Export Trade Co., Ltd , https://www.ntyaou.com