>>> Links: Kitchen cabinets are cleverly upgraded to make the kitchen instantly change
One, bogey material is not water resistant
The kitchen is a wet place, so the materials on the ground and the operating table should not leak water or seep. The wall and ceiling materials should be resistant to water and scrubbed with water.
Second, avoid material flammable
Fire is an essential energy source in the kitchen, so the surface decoration used in the kitchen must pay attention to fire protection requirements, especially the flame retardant properties of the material should be paid more attention around the stove.
Third, avoid tableware exposed
In the kitchen, pots and pans, bottles, cans and other items are numerous and miscellaneous. If exposed, it is easy to be oiled and difficult to clean.
Fourth, avoid cracks more
The kitchen is a place that is easy to filth. It should be kept as tight as possible. For example, the gap between the cabinet and the ceiling should be avoided as much as possible, because the ceiling tends to gather water vapor or oil stains, and the top of the cabinet is easy to accumulate dirt. The gap between them will become a daily cleaning difficulty. The gap between the pipes below the pool is also not easy to clean, and the door seals can be used to put trash cans or other debris inside.
Fifth, avoid using the mosaic floor
The mosaic is water-resistant and non-slip, but the mosaic block has a small area, many gaps, easy to hide dirt, and it is not easy to clean. If it is used for a long time, it is easy to produce part of the surface and it is difficult to repair. Therefore, it is best not to use in the kitchen.
Kitchen decoration cupboard door kitchen cabinet door
Strip clean disc is a new kind of Nylon fiber abrasive tools, can be the best substitute for traditional abrasive tools such as shutters and wire brushes.It is based on high-strength & wear-resistant fiber mesh, and the resin elastomer and nylon fiber and emery are bonded together by special process.
high-quality emery through a special process to form a high strength, high wear resistant, honeycomb shaped grinding wheel
solder joints, rust, sealant, scale, oxidation and other surface contaminants. Poly strip disc wheel an ideal tool for surface treatment such as paint, rust, and scale removal
wear resistance, strong water resistance, strong plasticity and good softness. Dirt will not block the fine seams of the grinding
surface, no rust, no fall off, low grinding sound and less dust
The strip clean disc network structure has the following characteristics:
1. Does not damage the surface of the object
2. The grinding force is uniform, and the grinding effect is uniform
3. Abrasion resistance, strong water resistance
4. Strong plasticity, good softness, suitable for various shapes of objects to be ground.
5. The dirt does not block the surface of the abrasive tool, there is less shedding, less noise, and less dust.
We distributes and wholesales various brands of Bonded Abrasives, Abrasive Sanding Disc, Cutting Wheels , Abrasive Flap Disc , Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , and Surface Conditioning Product etc, and enjoy a high position among consumers.
Clean And Strip Disc,Shaft Flap Wheel,Shank Mounted Flap Wheel,Keying Flap Wheel With Shaft
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jiadingabrasive.com