One, hinge
(1) Features In the frequent switching process of cabinet doors, the most frequently tested is the hinge. Not only does it need to accurately connect the cabinet and the door panel, but it also has to bear the weight of the door panel alone, and it must also keep the appearance of the door neatly arranged and not deformed. Most of the hinges currently seen on the market are detachable, and are divided into two parts: a base and a buckle. When selecting a cabinet, a salesman may be required to remove the door together with a hinged buckle to check the inside of the buckle.
(2) Selecting the current hinge generally has two points of card position and three points of card position, which can basically satisfy the use, and of course, the hinge of the three points is better. The hinged steel is the most important. If it is not selected well, after a period of time, the door panel may tilt forward and slip off the shoulder. Most of the brand's cabinet hardware uses cold-rolled steel, and its thickness and toughness are perfect. In addition, multiple-positioning hinges should be selected as much as possible. The so-called multi-point positioning means that the door panel can stay at any angle when it is opened, and opening will not be laborious, nor will it be suddenly closed, so as to ensure the safety of use, which is particularly important for lifting cabinet doors. Positioning is related to the toughness of the reeds used in the hardware. The quality of the reeds also determines the opening angle of the door. Good reeds can make the opening angle exceed 90 degrees.
Second, the characteristics of the slide (1) in the interior of the slide can not be seen by the naked eye, is its bearing structure, this part is directly related to its load-bearing capacity. At present, there are both steel ball slides and silicon wheel slides on the market. The former automatically removes dust and dirt on the slide rails through the rolling of the steel balls so as to ensure the cleanliness of the slide rails, without affecting the sliding function due to dirt entering the interior. At the same time, the steel ball can spread the force around, ensuring the stability of the drawer horizontally and vertically. The debris generated during the long-term use and friction of the silicon wheel slide is snow-like, and it can be brought up by rolling, which also does not affect the sliding of the drawer.
(2) The selection of a drawer is an integral part of the kitchen equipment. The most important fitting of the entire drawer is the slide rail. Due to the special environment of the kitchen, the low-quality slide rail feels good even for a short period of time. You will find it difficult to push and pull. When selected, the drawer can be completely withdrawn, the structure of the drawer can be clearly seen from the bottom and the specific structure of the part in contact with the slide rail, and the thickness of the drawer side panel can also be observed.
Third, the pressure device (1) Features In the cabinet hardware accessories, in addition to slides, drawers and hinges closely related to it, there are many pneumatic and hydraulic device hardware. These fittings are produced in response to evolving cabinet design methods, and are mainly used for flip-top doors and vertical lift doors. Some devices have three or even more braking positions, also known as "free to stop."
(2) Choose a pneumatic device with strong elasticity to maintain a certain distance between the panel of the cabinet and the cabinet, and provide a strong support for the panel. The triangular base makes the bracket more stable. The smooth and comfortable support allows the door panel to rise vertically in parallel, and it feels very light when pulled, as if there was no resistance. Cabinets with this type of device are very suitable for the elderly.
Fourth, pull the basket (1) Features Pull baskets are generally stainless steel, chrome and paint and other materials. Pull baskets can provide a larger storage space, and can use a basket to reasonably separate the space, so that all kinds of items and utensils get their own. According to different uses, the pull basket can be divided into basket pull baskets, pull baskets on three sides, drawer pull baskets, ultra-narrow pull baskets, deep pull baskets, and corner pull baskets. The addition of baskets and shelves in cabinets is a good way to increase the efficiency of the use of cabinets. According to their own habits, the owner can divide the kitchen utensils and cutlery into grids that are both hygienic and clear. Rotary racks make every space a good use. Instead of stretching your arms, you just need to gently turn around, even if the innermost items can be immediately presented to the owner. Fruits and vegetables can be placed on the rotating grid.
(2) choose to choose to pull the basket to pay attention to the following points. 1 The pull basket is generally tailored to the size of the cabinet, so the cabinet size provided must be accurate. 2 The welding spot of the pull basket should be full and there is no welding. 3 Pull the surface of the basket to be smooth, feel comfortable and free of burrs. 4 The most important point in choosing a basket is to not use chrome as a stainless steel.
(1) Features In the frequent switching process of cabinet doors, the most frequently tested is the hinge. Not only does it need to accurately connect the cabinet and the door panel, but it also has to bear the weight of the door panel alone, and it must also keep the appearance of the door neatly arranged and not deformed. Most of the hinges currently seen on the market are detachable, and are divided into two parts: a base and a buckle. When selecting a cabinet, a salesman may be required to remove the door together with a hinged buckle to check the inside of the buckle.
(2) Selecting the current hinge generally has two points of card position and three points of card position, which can basically satisfy the use, and of course, the hinge of the three points is better. The hinged steel is the most important. If it is not selected well, after a period of time, the door panel may tilt forward and slip off the shoulder. Most of the brand's cabinet hardware uses cold-rolled steel, and its thickness and toughness are perfect. In addition, multiple-positioning hinges should be selected as much as possible. The so-called multi-point positioning means that the door panel can stay at any angle when it is opened, and opening will not be laborious, nor will it be suddenly closed, so as to ensure the safety of use, which is particularly important for lifting cabinet doors. Positioning is related to the toughness of the reeds used in the hardware. The quality of the reeds also determines the opening angle of the door. Good reeds can make the opening angle exceed 90 degrees.
Second, the characteristics of the slide (1) in the interior of the slide can not be seen by the naked eye, is its bearing structure, this part is directly related to its load-bearing capacity. At present, there are both steel ball slides and silicon wheel slides on the market. The former automatically removes dust and dirt on the slide rails through the rolling of the steel balls so as to ensure the cleanliness of the slide rails, without affecting the sliding function due to dirt entering the interior. At the same time, the steel ball can spread the force around, ensuring the stability of the drawer horizontally and vertically. The debris generated during the long-term use and friction of the silicon wheel slide is snow-like, and it can be brought up by rolling, which also does not affect the sliding of the drawer.
(2) The selection of a drawer is an integral part of the kitchen equipment. The most important fitting of the entire drawer is the slide rail. Due to the special environment of the kitchen, the low-quality slide rail feels good even for a short period of time. You will find it difficult to push and pull. When selected, the drawer can be completely withdrawn, the structure of the drawer can be clearly seen from the bottom and the specific structure of the part in contact with the slide rail, and the thickness of the drawer side panel can also be observed.
Third, the pressure device (1) Features In the cabinet hardware accessories, in addition to slides, drawers and hinges closely related to it, there are many pneumatic and hydraulic device hardware. These fittings are produced in response to evolving cabinet design methods, and are mainly used for flip-top doors and vertical lift doors. Some devices have three or even more braking positions, also known as "free to stop."
(2) Choose a pneumatic device with strong elasticity to maintain a certain distance between the panel of the cabinet and the cabinet, and provide a strong support for the panel. The triangular base makes the bracket more stable. The smooth and comfortable support allows the door panel to rise vertically in parallel, and it feels very light when pulled, as if there was no resistance. Cabinets with this type of device are very suitable for the elderly.
Fourth, pull the basket (1) Features Pull baskets are generally stainless steel, chrome and paint and other materials. Pull baskets can provide a larger storage space, and can use a basket to reasonably separate the space, so that all kinds of items and utensils get their own. According to different uses, the pull basket can be divided into basket pull baskets, pull baskets on three sides, drawer pull baskets, ultra-narrow pull baskets, deep pull baskets, and corner pull baskets. The addition of baskets and shelves in cabinets is a good way to increase the efficiency of the use of cabinets. According to their own habits, the owner can divide the kitchen utensils and cutlery into grids that are both hygienic and clear. Rotary racks make every space a good use. Instead of stretching your arms, you just need to gently turn around, even if the innermost items can be immediately presented to the owner. Fruits and vegetables can be placed on the rotating grid.
(2) choose to choose to pull the basket to pay attention to the following points. 1 The pull basket is generally tailored to the size of the cabinet, so the cabinet size provided must be accurate. 2 The welding spot of the pull basket should be full and there is no welding. 3 Pull the surface of the basket to be smooth, feel comfortable and free of burrs. 4 The most important point in choosing a basket is to not use chrome as a stainless steel.
Hardware Space Effect Picture Space Stainless Steel Switch Paint Kitchen Equipment Drawer Cabinet Cabinet Door Stainless Steel Cabinet Cupboard Door Cupboard Doors Kitchen Cabinet Door Cabinet Door
Volumetric Plastic Water Meter
Ningbo Jingcheng Meter Co., Ltd. is a professional Volumetric Plastic Water Meter manufacturer.
Mechanical Water Meters are used the mechanical transmission structure. Measuring, memorizing and displaying the volume of cold water passing through the pipeline. They are widely used due to the simple structure and cheap price. Jingcheng mechanical water meters are used worldwide by municipal utilities, companies and water suppliers.
Please feel free to contact us if you need any Volumetric Plastic Water Meter .
Domestic Water Meter,Plastic Flow Water Meter,Volumetric Plastic Water Meter,Plastic Volumetric Flow Water Meter
Ningbo Jingcheng Technology Co., Ltd. , https://www.jingchengmeter.com